Not Sure What You’re Looking For?

2010 Hustler Turf Equipment CONSIGNMENT SALE! Hustler Super Z


1700 Hours
Midstate Turf & Tractor, LLC
Hustler Turf Equipment


Dealer Insights

*Consignment Mower*
Commercial Hustler Zero Turn
1700 Hours
31 HP Kawasaki


  • Top speed of 15 mph!
  • Dual oil coolers for increased system life
  • High-capacity pumps and motors
  • Awesome on slopes
  • Superior quality of cut! Over 18,700 fpm blade tip speed
  • Wide range of engine options
  • 60 in. XR-7 side-discharge decks
  • 60 in. rear-discharge decks
  • Comfortable foot-operated deck-lift system
  • 14.4 gallon fuel capacity
  • Cutting heights from 1 in. to 5 in.
General Specifications
  • Fuel: Unleaded gasoline with octane rating of 87 or higher
  • Fuel Filter: Replaceable, automotive-type
  • Air Filter: Heavy-duty air cleaner to extend the service interval for excessive, dirty applications and improved performance
  • Safety Features: Operator presence system connected to deck and drive clutches. Stabilizer rollers at rear of tractor
  • Seat: Standard: Molded-vinyl seat with armrests. Fore and aft adjustment
  • Optional: Molded-vinyl suspension seat with armrests. Fore and aft adjustment
  • Construction: Mainframe is 1.5 in. x 3 in. x .187 in. (3.8 cm x 7.62 cm x .47 cm) rectangular steel tubing with internal gusset in frame bend Drive motors mounted to .179 in. (.45 cm) welded steel.
  • Front caster wheels are mounted with roller bearings on each wheel. Front caster forks: .5 in. (1.27 cm) steel
  • Deck Lift: Foot-operated deck height adjustment. Pin for setting height, detent for transport position Controls: Hand-operated choke/throttle, ignition switch, electric mower clutch. Integrated parking brakes
  • Indicators: Hour meter, engine warning light
  • Cup Holder: Two cup holders molded into the left side fuel tank. Accommodates nearly any cup size including Big Gulp™
  • Mower Drive: Single V-belt drive from engine with electric clutch. Spring tension idler for extended belt life.
Engine Specifications
  • Model: Kawasaki
  • Horsepower: 31 hp
  • Starter: 12-volt
  • Ignition: Electronic
  • Charging System: 12-volt, 20-amp
  • Governor: Mechanical
  • Cooling: Liquid
Traction Drive System
  • Type: Dual hydrostatic. Individual pumps power two direct-drive wheel motors. Hydrostatic system operates on 10W40 motor oil. Super Z features transmission drive (oil) cooler for increased system life.
  • Pumps: Two variable displacement, axial-piston type. Each pump powers one drive-wheel motor. Hydro-Gear BDP21
  • Pump Drive: V-belt drive from engine crankshaft Hydraulic Lines Stainless-steel, high-pressure lines with Parker Seal- Lok™ O-Ring Face-Seal fittings, Hydraulic lines and fittings guaranteed to never leak!
  • Final Drive: Direct-drive high-torque wheel motors. One for each drive wheel. White CE 18
  • Filter: Spin-on type; 25 micron
  • Ground Speed Infinitely variable: Forward: 0-15 mph (0-22.53 kph), Reverse: 0-7.5 mph (0-12.07 kph)
  • Steering: Twin-lever SmoothTrak™ steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls
  • Turning Radius: True zero degree. Turns within its own length. Counterrotating, independent drive wheels
  • Service: Hydrostatic dynamic braking
  • Parking: Automotive-style drum brakes. When steering levers are placed in neutral position, integral park brakes are automatically engaged
  • Front: 13 x 6.50 – 6, rib tread
  • Drive: 24 x 12.00- 12, turf tread
  • Fuel System: 14.4 gal. (54.5 l)
  • Height: 39 in. (99 cm)
  • Deck Length w/60 in. Deck: 77 in. (195.58 cm)
  • Overall width w/60 in. Deck: 61 in. (154.94 cm) w/discharge chute up
  • Tire-to-tire width w/60 in. Deck: 52 in. (132.08 cm)
  • Weight w/60 in. Deck: 1212 lbs. (549.75 kg)
Mowing Decks
  • 60 in. Side-Discharge Deck
  • Type: Free-floating mower using three blades with center blade to the front. Mower is suspended at the corners. Includes 6 deck-mounted rollers to improve flotation in rolling and uneven terrain.
  • Deck Lift: Raise and lower deck from driver's seat with simple footoperated deck height adjustment. Pin for setting height, transport position. Change cutting heights, hop curbs and trailer more easily.
  • Construction 7 gauge deck plate with an 11-gauge deck plate doubler with 7-gauge triplers at each spindle mount (nearly 1/2-in. thick!) Solid 1-1/2 in. x 1/2 in. flat steel flat bars reinforce impact areas on trim edges. 7-gauge reinforced front edge. Lifetime warranty on leading edge of deck.
  • Steel deck housing: 5.80 in. (10.16 cm) deep to provide room for highcapacity mowing. Molded rubber discharge chute.
  • Cutting Heights: Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25 in. increments from 1 in. to 5 in. (2.55 cm to 12.7 cm).
  • Mowing Blades Heavy-duty, heat-treated, high-lift steel blades, w/60 in. Deck: 20.50 in. x 2.50 in. x .203 in. flat blade, high sail Fusion™ blade
  • Blade Tip Speed w/ 60 in. Deck: 18,400 fpm
  • Blade Drive: V-belt drive to all three spindles. Spring tension idler pulley.
  • Spindles: Machine ductile housing, 1 in. (2.5 cm) diameter high carbon steel shafts and sealed ball bearings. 3-year warranty on spindle bearings.
  • Flotation: Suspended mower floats on four spring-assisted chains. 6 antiscalp wheels are standard.
  • Discharge Chute: Molded rubber. Over-center design allows for chute to be folded up for improved trailering or to pass thru gates, etc.
  • Width of Cut w/60 in. Deck: 60 in. (152.4 cm)
  • Trim Capacity (left side) w/60 in. Deck: 3 in. (7.62 cm)
Attachments & Accessories
  • BAC-VAC™ Catcher: Rear-mounted, 9-bushel hopper is dumped from the seat without leaving the machine. Blower is powered from right-side deck spindle (no pony engine required). Hopper and blower can be added or removed in seconds.
  • Mulch Kit: Easiest-to-install mulch kit on the market! Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil.
  • Hitch Kit: Optional bolt-on hitch with 7/8-inch hole. Will accept any standard ball.
  • Flex Forks: Flex Forks™ smooth out the ride producing a more even cut especially over uneven terrain. A smoother ride allows for greater operator comfort at higher speeds. Mow faster, get done sooner.
  • Steering Lever Extensions: Optional armrests are available for added arm support.
  • 3 Bag Catcher: TEasy-on, easy off blower and hopper with large diameter, flexible discharge tube to reduce clogging. Steel hood with site window and gas cylinder. Durable, heavy-duty bags with 12 bushel capacity.
  • Flex Seat: Like a rocking chair for your Hustler. Shock-absorbing seat provides more comfort to the operator.
  • Hydralic Deck Lift: Raise and lower the deck with the flip of a switch.
  • Striping Roller: The XR-7 deck features the option of a striping roller for that ultra-fine look.
  • Light Kit: Work later with our optional light kit.
  • Lifetime warranty on the tractor frame
  • Lifetime warranty on the leading edge of the deck
  • Hydraulic hoses and fittings guaranteed to never leak
  • 3-year warranty on the blade spindle bearings
  • 3-year warranty on the front caster fork bearings
  • Limited 2-year warranty -- parts and labor



Engine Manufacturer
Horse Power
31 hp


Dual hydrostatic
Wheel Size
Front: 13 x 6.50 – 6, rib tread, Drive: 24 x 12.00- 12, turf tread
Fuel Capacity
14.4 gal. (54.5 l)


Deck Size
60 in.
Discharge Type