Inventory Unit Detail

2025 Exmark LRX801GKA606Q1

$16,899.00

$16,899.00

Overview

New/Used New
Availability In Stock
LocationMidstate Turf & Tractor, LLC
Condition Excellent

Product Features

Dealer Notes
THE ALL NEW REDESIGNED LAZER X SERIES IS IN STOCK NOW!

Description



Equipment

  • UPC: 193308225128
  • Starter: Electric
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Caster Forks: .50" thick caster yoke arms.
  • Front Caster Tires: 13 x 6.5-6 smooth tread, semi-pneumatic tires.
  • Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
  • Parking Brake: Lever-actuated disc brake.
  • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
  • Electrical: 12-volt battery with 15-amp alternator.
  • Standard Features: Engine hour meter and cup holder
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

Power Components

  • Transmission Speeds: Infinitely Variable
  • Engine Brand: Kawasaki
  • Engine Model: FX801V
  • Engine Displacement: 852
  • Engine Series: V-Twin
  • Speed: Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
  • Transmission: Hydrostatic
  • Engine Spec: FX801V-MS04-R
  • Drive: Hydro-Drive
  • Engine Speed: 3,750 RPM
  • Air Filter: Heavy-duty canister air filtration system
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
  • Fuel Type: Gas Carbureted
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Drive Wheel Release: Allows unit movement without engine running.
  • Fuel Indicator: Yes - electronic Sender
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system.
  • Carb Compliant: No
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.

Decks

  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
  • Width / Cutting Deck: 60"
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Blades: 3 Blades at 20.50" Length

With options to meet the needs of the most demanding landscape maintenance professionals, our top-rated Exmark Lazer Z X-Series zero-turn mowers represent the state-of-the-art in commercial mowers. Cutting deck options include our massive 96-inch UltraCut Flex Wing cutting deck and select models equipped with our exclusive cut quality enhancing Adapt Technology. Choose from rugged commercial-grade engines, including high-efficiency Electronic Fuel Injection (EFI) options equipped with our exclusive EGov and RED Technology, which can boost fuel efficiency by up to 41%. Lazer Z X-Series zero-turn mower models are available with UltraCut Series 6 decks in 52-, 60-, and 72-inch cutting widths, with or without Adapt Technology, or the 96-inch UltraCut Flex-Wing rear discharge cutting deck.



Regardless of the combination you choose for your Exmark Lazer Z zero-turn mower, you’ll ride in unmatched comfort thanks to our full-suspension seating system and smooth, easy-to-use controls that offer precision maneuverability. And from a long-term value standpoint, nothing beats the Exmark Lazer Z X-Series mower. It's the perfect combination of power, productivity, and durability. That's why it's our top-of-the-line gasoline-powered mower and should be at the top of your list.

    Features

    • Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
    • UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)
    • A New Level of Comfort: Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
    • Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
    • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
    • Oil Guard System: The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.
    • Adapt Your Cut: Adjust deck rake quickly and easily to optimize cut quality and cutting performance for a variety of turf types and conditions. Adapt is especially useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.

    Equipment

    • UPC: 193308225128
    • Starter: Electric
    • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
    • Caster Forks: .50" thick caster yoke arms.
    • Front Caster Tires: 13 x 6.5-6 smooth tread, semi-pneumatic tires.
    • Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
    • Parking Brake: Lever-actuated disc brake.
    • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
    • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
    • Electrical: 12-volt battery with 15-amp alternator.
    • Standard Features: Engine hour meter and cup holder
    • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

    Power Components

    • Transmission Speeds: Infinitely Variable
    • Engine Brand: Kawasaki
    • Engine Model: FX801V
    • Engine Displacement: 852
    • Engine Series: V-Twin
    • Speed: Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
    • Transmission: Hydrostatic
    • Engine Spec: FX801V-MS04-R
    • Drive: Hydro-Drive
    • Engine Speed: 3,750 RPM
    • Air Filter: Heavy-duty canister air filtration system
    • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
    • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
    • Fuel Type: Gas Carbureted
    • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
    • Drive Wheel Release: Allows unit movement without engine running.
    • Fuel Indicator: Yes - electronic Sender
    • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system.
    • Carb Compliant: No
    • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    • ROPS: 2-post foldable ROPS standard with seat belt and latch.

    Decks

    • Deck Style: Floating Deck
    • Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
    • Width / Cutting Deck: 60"
    • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    • Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
    • Blade Tip Speed: Approximately 18,500 fpm.
    • Blades: 3 Blades at 20.50" Length

    Shopping Tools